Free cash register

Kash.click, free online POS software since 2011

Learn More

Follow Us

Help Center

This help will guide you through the setup and usage of our point of sale cash register software.

Search by keyword in the help section:

🖨️ Configure printers

Standard method (browser)

Click the 'Print Receipt' button from the cash register interface. The receipt visible in the 'Receipt' area will be printed via the default printer configured in your system.

Remember to configure margins and disable headers/footers via 'File > Page Setup' in your browser.

✅ No setup is required, but a dialog box appears each time you print.

Printing without dialog box

To avoid the print dialog box, use one of the compatible printers built into our Android, iOS, or Windows apps.

This method allows automatic printing of the ticket at the end of an order.

Printing from Android

Android allows printing via the system. Some Bluetooth or network printers are compatible.

Integrated and detected printers

If you are using our Android, iOS, or Microsoft app, some printers are automatically detected

  • Sunmi: automatically detected under Android (printer and secondary screen).
  • StarMicronics: Bluetooth connection (Android/iOs/Microsoft) via General Options > Hardware.
  • KKmoon POS-5802DD: Bluetooth connection (Android) via General Options > Hardware.
  • Epson Connect: Bluetooth connection (Android/iOs) via General Options > Hardware. (Epson ePos)

Epson Ethernet (not recommended)

Printing via LAN works without dialog boxes and on all browsers, but its configuration is more complex.

  1. Connect the printer to the local network.
  2. Assign it an IP via EpsonNet Config (eg: 192.168.1.168).
  3. Access the configuration interface: http://[ip_address].
  4. Activate Epson ePOS Print and set a 'Device ID'.
  5. In the app, enable 'Epson Ethernet Printer' and enter IP + Device ID.
✅ Not recommended: with Android/iOS apps, always use the Epson Connect ePos connection, which is simpler to set up.
✅ Not available on Android/iOS (only accessible via browser)
✅ It may also be necessary to accept a security warning on devices that will use the printer. To accept the possible security warning (this depends on the browser used), you must go to this software in the printer configuration page, use the "Open Epson configuration page" button, and accept the security warning, possibly checking "Always accept security warning".
✅ Press the back button of your Epson printer for 5 seconds to print the network information
✅ Default credentials to access the printer configuration page: epson / epson

KKmoon POS-5802DD Printer

This printer works with Android/iOS app only, via Bluetooth.

To display accented characters and the € symbol, change the character set via the KKmoon drivers.

  1. Download and install the KKmoon driver on your computer.
  2. Connect the printer via USB and open the configuration software.
  3. Change the 'Default code page' to PC437(Std.Europe)(1).
Register now
Licence Creative Commons This document is made available under the terms of the licence Creative Commons Attribution 4.0 International (CC BY 4.0) .